i-manager Publications

On the introduction of return mapping schemes in elasto-plastic finite element simulations for isotropic and kinematic hardening

Moosa Esmaeili*, Andreas ?chsner**

* School of Engineering, University of Aberdeen, UK.

** Deportment of Applied Mechanics, University of Technology of Malaysia, Malaysia.

Periodicity:November - January'2013
DOI : https://doi.org/10.26634/jme.3.1.2084

Abstract

Elasto-plastic constitutive equations are integrated in the framework of nonlinear finite element techniques based on so-called predictor corrector schemes. An Introduction of material nonlinearities (elasto-plastic behaviour) applied in the framework of finite element analysis. The restriction to the one-dimensional case facilities significantly the mathematical notation while the steps remain the same as in the general three dimensional cases. In addition, the entire solution procedure can be easily observed in the classical stress-strain diagram. The concept of the predictor corrector scheme is presented for the case of isotropic, kinematic and combined hardening. Numerical examples illustrate the influence of different boundary conditions for different hardening laws.

Keywords

Finite Element Method, Plasticity, Numerical Simulation, Predictor-Corrector Procedure, Return-Mapping Schemes, Isotropic Hardening, Kinematic Hardening.

How to Cite this Article?

Esmaeili, M. & ?chsner,A. (2013). On the introduction of return mapping schemes in elasto-plastic finite element simulations for isotropic and kinematic hardening. i-manager's Journal on Mechanical Engineering, 3(1), 17-29. https://doi.org/10.26634/jme.3.1.2084

References

[1]. Owen, D. R. J., & Hinton, E. (1980). Finite elements in plasticity: theory and practice. Swansea, Pineridge Press Limited.

[2]. Crisfield, M. A. (1991). Non-linear finite element analysis of solids and structures (Vol. 1). Chichester, John Wiley & Sons.

[3]. Crisfield, M. A. (1997). Non-linear finite element analysis of solids and structures (Vol. 2). Chichester, John Wiley & Sons.

[4]. Simo, J. C., & Hughes, T. J. R. (1998). Computational Inelasticity. New York, Springer-Verlag.

[5]. Belytschko, T. W. K., Liu, & Moran, B. (2000). Nonlinear finite elements for continua and structures. Chichester, John Wiley & Sons.

[6]. Dunne, F., & Petrinic, N. (2005). Introduction to computational plasticity. Oxford, Oxford University Press.

[7]. de Souza Neto, E. A., Peric, D., & Owen, D. R. J. (2008). Computational Methods for Plasticity: Theory and Applications. Chichester, John Wiley & Sons.

[8]. Esmaeili, M. and Öchsner, A. (2011). A one-dimensional implementation of a coupled elasto-plastic model for ductile damage, Mat. Science and Eng. Tech. J., 42(5), 444–45.

[9]. Armen, H. (1979). Assumptions, models, and computational methods for plasticity, Comput. Struct., 10(1), 161-174.

[10]. Reddy, J. N. (2006). An introduction to the finite element method. Singapore, McGraw Hill.

[11]. Cook, R. D., Malkus, D. S., Plesha, M. E., & Witt, R. J. (2002). Concepts and applications of finite element analysis. Chichester, John Wiley & Sons.

[12]. Simo, J. C., & Ortiz, M. (1985). A unified approach to finite deformation elasto plasticity based on the use of hyper elastic constitutive equations. Comput. Methods Appl. Mech. Engrg., 49 , 221–245.

[13]. Moran, B., Ortiz M., & Shih, C. F. (1990). Formulation of implicit finite element methods for multiplicative finite deformation plasticity, Int. J. Numer. Meth. Eng., 29/3 (1990), 483–514.

[14]. Wriggers, P. (2001). Nichtlineare Finite-Element-Methoden. Berlin, Springer-Verlag.

[15]. Merkel, M., Öchsner, A. (2010). Eindimensionale Finite Elemente – Ein Einstieg in die Methode. Berlin, Springer.

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	15	15	200	15
Pdf & Online	35	35	400	25

On the introduction of return mapping schemes in elasto-plastic finite element simulations for isotropic and kinematic hardening

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content: