i-manager Publications

The Effectiveness of Various Cutting Fluids on the Surface Roughness of AISI 1045 Steel During Turning Operation Using Minimum Quantity Lubrication System

Milon D. Selvam*, N. M. Sivaram**

* Research Scholar, Department of Mechanical Engineering, Karpagam University, Coimbatore, India.

** Associate Professor, Department of Mechanical Engineering, Karpagam University, Coimbatore, India.

Periodicity:August - October'2017
DOI : https://doi.org/10.26634/jfet.13.1.13761

Abstract

This paper elucidates the effect of mineral oil based cutting fluid such as Servocut 'S' grade oil emulsified with water and used edible vegetable oil based cutting fluids, such as Palm Oil and Peanut Oil emulsified with water on the surface quality of AISI 1045 cylindrical steel components. The turning operation is carried out with three TiN coated carbide inserts of different nose radius on AISI 1045 steel using Minimum Quantity Lubrication system. The machining parameters, namely spindle speed, feed rate, depth of cut, tool nose radius and cutting fluids are decided for the lead of trials. The trials are designed based on Taguchi's L₂₇(3⁵) orthogonal array. The surface roughness of the turned samples is measured with a surface roughness analyzer and in this manner; a scientific model representing the average surface roughness is created through regression examination. The results revealed that the surface quality of the turned samples using vegetable based cutting fluids are equivalence with the components machined using mineral oil based cutting fluid.

Keywords

AISI 1045, Machining, Servocut 'S', Palm Oil, Peanut Oil, Minimum Quantity Lubrication System, Taguch

How to Cite this Article?

Selvam, M.D., and Sivaram, N. M. (2017). The Effectiveness of Various Cutting Fluids on the Surface Roughness of AISI 1045 Steel During Turning Operation Using Minimum Quantity Lubrication System. i-manager’s Journal on Future Engineering and Technology, 13(1), 36-43. https://doi.org/10.26634/jfet.13.1.13761

References

[1]. Abhang, L. B., & Hameedullah, M. (2012). Determination of optimum parameters for multi-performance characteristics in turning by using grey relational analysis. The International Journal of Advanced Manufacturing Technology, 63, 13–24.

[2]. Ali, S. M., Dhar, N. R., & Dey, S. K. (2011). Effect of Minimum Quantity Lubrication (MQL) on cutting performance in turning medium carbon steel by uncoated carbide insert at different speed-feed combinations. Advances in Production Engineering & Management, 6, 185-196.

[3]. Belavendram, N. (1995). Quality by Design: Taguchi techniques for industrial experimentation. Prentice Hall, London.

[4]. Boubekri, N., Shaikh, V., & Foster, P. R. (2010). A technology enabled for green machining: Minimum Quantity Lubrication (MQL). Journal of Manufacturing Technology Management, 21, 556-566.

[5]. Debnath, S., Reddy, M. M., & Yi, Q. S. (2014). Environmental friendly cutting fluids and cooling techniques in machining: A review. Journal of Cleaner Production, 83, 33-47.

[6]. Dureja, J. S., Singh, R., & Bhatti, M. S. (2014). Optimizing flank wear and surface roughness during hard turning of AISI D3 steel by Taguchi and RSM methods. Production & Manufacturing Research, 2(1), 767-783.

[7]. Hadad, M., & Sadeghi, B. (2013). Minimum quantity lubrication-MQL turning of AISI 4140 steel alloy. Journal of Cleaner Production, 54, 332-343.

[8]. Hwang, Y. K., & Lee, C. M. (2010). Surface roughness and cutting force prediction in MQL and wet turning process of AISI 1045 using design of experiments. Journal of Mechanical Science and Technology, 24(8), 1669- 1677.

[9]. Kelly, J. F., & Cotterell, M. G. (2002). Minimal lubrication machining of aluminium alloys. Journal of Materials Processing Technology, 120(1), 327-334.

[10]. Khandekar, S., Sankar, M. R., Agnihotri, V., & Ramk uma r, J. (2012). Nano- cutting fluid for enhancement of metal cutting performance. Materials and Manufacturing Processes, 27(9), 963-967.

[11]. Kuram, E., Ozcelik, B., & Demirbas, E. (2013). Environmentally friendly machining: Vegetable based cutting fluids. In Green Manufacturing Processes and Systems, Springer Berlin Heidelberg, 23-47.

[12]. Kurgin, S., Dasch, J. M., Simon, D. L., Barber, G. C., & Zou, Q. (2012). Evaluation of the convective heat transfer coefficient for Minimum Quantity Lubrication (MQL). Industrial Lubrication and Tribology, 64(6), 376-386.

[13]. Leppert, T. (2011). Effect of cooling and lubrication conditions on surface topography and turning process of C45 steel. International Journal of Machine Tools and Manufacture, 51(2), 120-126.

[14]. Liao, Y. S., Liao, C. H., & Lin, H. M. (2017). Study of oilwater ratio and flow rate of MQL fluid in high speed milling of Inconel 718. International Journal of Precision Engineering and Manufacturing, 18(2), 257-262.

[15]. Montgomery, D. C. (2008). Design and Analysis of Experiments. John Wiley & Sons.

[16]. Noordin, M. Y., Venkatesh, V. C., Sharif, S., Elting, S., & Abdullah, A. (2004). Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel. Journal of Materials Processing Technology, 145(1), 46-58.

[17]. Rahim, E. A., & Sasahara, H. (2011a). A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys. Tribology International, 44(3), 309-317.

[18]. Rahim, E. A., & Sasahara, H. (2011b). An analysis of surface integrity when drilling inconel 718 using palm oil and synthetic ester under MQL condition. Machining Science and Technology, 15(1), 76-90.

[19]. Sarhan, A. A., Sayuti, M., & Hamdi, M. (2012). Reduction of power and lubricant oil consumption in milling process using a new SiO₂ nanolubrication system. The International Journal of Advanced Manufacturing Technology, 63(5), 505-512.

[20]. Schwarz, M., Dado, M., Hnilica, R., & Veverková, D. (2015). Environmental and health aspects of metalworking fluid use. Polish Journal of Environmental Studies, 24(1), 37-45.

[21]. Selvam, M.D., & Senthil, P. (2016). Investigation on the effect of turning operation on surface roughness of hardened C45 carbon steel, Australian Journal of Mechanical Engineering, 14(2), 131-137.

[22]. Sharma, A. K., Tiwari, A. K., & Dixit, A. R. (2016). Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review. Journal of Cleaner Production, 127, 1-18.

[23]. Sharma, J., & Sidhu, B.S. (2014). Investigation of effects of dry and near dry machining on AISI D2 steel using vegetable oil. Journal of Cleaner Production, 66, 619-623.

[24]. Shihab, S. K., Khan, Z. A., Mohammad, A., & Siddiquee, A. N. (2014). A review of turning of hard steels used in bearing and automotive applications. Production & Manufacturing Research, 2(1), 24-49.

[25]. Su, Y., Gong, L., Li, B., Liu, Z., & Chen, D. (2016). Performance evaluation of nanofluid MQL with vegetable-based oil and ester oil as base fluids in turning. The International Journal of Advanced Manufacturing Technology, 83, 2083-2089.

[26]. Walker, T. (2013). The MQL Handbook: A guide to machining with Minimum Quantity Lubrication. Unist Inc.

[27]. Wang, C. D., Chen, M., An, Q. L., Wang, M., & Zhu, Y. H. (2014). Tool wear performance in face milling Inconel 182 using minimum quantity lubrication with different nozzle positions. International Journal of Precision Engineering and Manufacturing, 15(3), 557-565.

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25

The Effectiveness of Various Cutting Fluids on the Surface Roughness of AISI 1045 Steel During Turning Operation Using Minimum Quantity Lubrication System

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content: